Custom Five-Ply Fry Pans for a European Wellness Brand: 24cm & 28cm
A European health and wellness brand came to Bonray to launch its first cookware line: a five-ply stainless steel fry pan, 100% free of aluminum contact, Teflon, PFAS and toxic coatings. We developed it in two sizes — 24cm and 28cm — with a stainless steel handle, laser-engraved branding and retail-ready gift packaging. This case follows our standard custom process, step by step, from the first brief to approved pre-production samples.
Stage 1 — The Brief
The brief was precise: a 28cm fry pan in surgical-grade 18/10 stainless steel (304), five-ply construction, oven safe to 250–300°C including the handle, a distinctive red monogram handle, a stay-cool antique brass finish handle as an alternative, compatibility with gas, electric and induction hobs, premium rigid red box packaging, and third-party safety testing. Pricing was requested for MOQs of 500 and 1,000 units, with shipping options and lead times.
Before quoting, we clarified one point first: the brief described two different handles, and each one changes the tooling, the cost and the timeline. The red monogram handle is a cast stainless steel handle wrapped in red silicone with a printed logo; the antique brass finish is a cast stainless steel handle with a PVD gold plating finish. Confirming the choice before the quotation saved a round of rework.
Stage 2 — Specification and Quotation
Two specification decisions shaped the project.
Size. The client first considered 26cm — the best-selling fry pan size in European markets. We then proposed our standard production sizes, 24 × 4.5 cm and 28 × 5 cm, instead of tooling a one-off size. Using sizes already in production removed the material lead time for a new size and kept the project on schedule. Before confirming, the client asked whether the 0.5 cm lower height would affect capacity, heat distribution or performance. We answered in writing: sloped fry pans are standardized by diameter rather than capacity, the 24cm pan still measures 9.5 inches and the 28cm pan 11 inches, and the change does not affect heat distribution or function — the same pan shape used by established American brands.
Material. The client asked for 18/10 stainless steel. We explained that we normally use food-grade 18/8 (304) stainless steel, which is equally food-safe and LFGB/FDA compliant, while 18/10 steel carries a 3,000-piece MOQ from the steel supplier. The quotation was issued for both sizes in five-ply and three-ply, with an interior and exterior satin finish.
Stage 3 — Samples and Technical Proof
Because the requested size had no stock sample, we offered our existing 28cm five-ply sample for a fast quality review first, while a custom-size sample would have taken 20–30 days to produce. The stock sample carried another customer’s small engraved mark near the handle base — we told the client before shipping, and it does not appear on the final product.
Then came the technical deep dive. The client asked for the exact five-layer sequence, proof of full aluminum encapsulation, the thickness of each layer, and a clarification on the peel-strength values in the inspection certificate — including a header value that turned out to be a misprint in the certificate itself. We answered layer by layer, with the certificate in hand:
- Layer stack, inner to outer: SUS304 / AL1050 / AL3003 / AL1050 / SUS430. The fifth layer is a second AL1050 sheet.
- Layer thickness: SUS304 0.4 mm, AL1050 0.5 mm, AL3003 0.5 mm, AL1050 0.5 mm, SUS430 0.6 mm. Total base thickness 2.5 mm.
- Encapsulation: all aluminum layers are fully enclosed between SUS304 and SUS430, and the pan edge is finished with a rolled rim, so aluminum cannot be exposed during use.
- Peel strength: the certificate header reading “≥200 N/mm” is a misprint for 20 N/mm; the measured values of 56–59 N are consistent with the industry range of 50–70 N for good five-ply construction.
Stage 4 — Pre-Production Samples and Packaging
Technical drawings for both sizes were approved, and pre-production samples were made to those drawings — two sets of each size — packed in white boxes pending the final color box artwork. Our rule is simple: no mass production starts until the client signs off the pre-production samples and the final packaging design.
Packaging was developed in parallel. The client chose the red rigid gift box. We supplied the color box die line so artwork could start early, added the protective cardboard insert, prepared a kraft inner box insert mockup as an alternative, and absorbed the extra cost of double-sided printing for the new artwork. To show the final look, we pasted the digital proof onto a white box by hand. The packing configuration is 1 unit per color box and 4 color boxes per master carton. We also flagged a risk for the European market: a single color box can be damaged during transport and distribution, and recommended an additional corrugated outer carton sourced locally in Europe.
On the handle, the final signed-off sample uses a stainless steel handle — riveted to the pan body, with a hanging hole and a laser-engraved brand monogram — not a silicone-wrapped handle. The silicone-wrapped option was explored during development and set aside; the approved sample is the all-stainless handle shown in the photos on this page.
Stage 5 — Production and Result
With pre-production samples approved and the specification locked, pan bodies were produced and all components purchased and held in stock, ready for final assembly and packing. The result of the project:
- Two custom sizes, 24cm and 28cm, developed from one brief and one five-ply construction.
- A fully documented specification — layer stack, thicknesses, encapsulation and test values — the client could verify against certificates.
- Retail-ready packaging specified end to end: rigid red gift box, protective insert, inner box options and master carton configuration.
- A repeatable process the client could follow for the next product: brief, specification, sample, technical proof, pre-production approval, then production.
| 24cm Fry Pan | 28cm Fry Pan | |
|---|---|---|
| Size | 24 × 4.5 cm (9.5″) | 28 × 5 cm (11″) |
| Construction | Five-ply stainless steel | Five-ply stainless steel |
| Layer stack (inner to outer) | SUS304 / AL1050 / AL3003 / AL1050 / SUS430 | SUS304 / AL1050 / AL3003 / AL1050 / SUS430 |
| Layer thickness | 0.4 / 0.5 / 0.5 / 0.5 / 0.6 mm | 0.4 / 0.5 / 0.5 / 0.5 / 0.6 mm |
| Total base thickness | 2.5 mm | 2.5 mm |
| Material | Food-grade 304 stainless steel, LFGB & FDA compliant | Food-grade 304 stainless steel, LFGB & FDA compliant |
| Handle | Stainless steel handle, riveted, hanging hole, laser-engraved brand monogram | Stainless steel handle, riveted, hanging hole, laser-engraved brand monogram |
| Finish | Interior and exterior satin finish | Interior and exterior satin finish |
| Heat sources | Gas, electric, induction; oven safe 250–300°C including handle | Gas, electric, induction; oven safe 250–300°C including handle |
| Free of | Aluminum contact, Teflon, PFAS and toxic coatings; third-party tested | Aluminum contact, Teflon, PFAS and toxic coatings; third-party tested |
| Retail packaging | Premium rigid red color box, 1 unit per box, 4 boxes per master carton; protective cardboard insert | Premium rigid red color box, 1 unit per box, 4 boxes per master carton; protective cardboard insert |
Start Your Custom Fry Pan Project
If you are launching a cookware line and need a custom five-ply fry pan — your size, your handle, your packaging — tell us the specification and we will work through it the same way: samples first, technical answers in writing, and production only after your approval.
Frequently Asked Questions
Yes. 24cm and 28cm are our standard five-ply sizes; other sizes are possible with new tooling. Standard samples are ready within 5 days; custom samples need mould development, typically 25–35 days.
No. The aluminum layers are fully encapsulated between food-grade 304 stainless steel inside and 430 stainless steel outside, and the rim is rolled, so aluminum cannot be exposed during use.
Production lead time is 4–6 weeks depending on the season, after pre-production sample approval and final packaging confirmation.